Professional Radon Mitigation Services

Radon System Repair & Maintenance in Buffalo, Western NY & PA

Maintain continuous protection with our expert radon system repair services. We diagnose performance issues and service installations from any company, providing honest recommendations to make your home safer. Whether you need a radon fan replacement or new cracks sealed, we do it all in Buffalo, Rochester, Pittsburgh, Syracuse, and beyond.

Schedule Free Consulation Learn More

Why Radon SYSTEM REPAIR AND MAINTENANCE Matters

Can Certified Radon Systems Repair ANy Radon Mitigation System?

Your radon mitigation system is your primary defense against harmful gas, requiring regular attention to function correctly. We offer comprehensive residential radon system repair and maintenance to ensure your equipment operates efficiently year-round.

Whether you have a loud fan or an alarm sounding, our expert technicians can service systems installed by any contractor. Don’t let a malfunction compromise your air quality. Trust us to diagnose the issue and restore your system’s performance for your family’s continued peace of mind.

3,000+

Systems Installed

18

Years of Experience

99%

Success Rate

EPA Approved

NRPP Licensed Professionals

The Problem & Solution

From Dangerous to Worry-Free

The Problem

  • Elevated radon levels (above 4.0 pCi/L) detected in your home
  • Radon is a radioactive gas that causes lung cancer
  • Invisible, odorless threat continuously entering your home through foundation cracks and soil
  • Long-term exposure puts your family’s health at serious risk
  • Can impact property value and home sales

The Outcome

  • Radon levels reduced to safer levels (typically below 2.0 pCi/L)
  • Family protected from long-term radon exposure and lung cancer risk
  • Clean, professional installation with minimal disruption to your home
  • Peace of mind with guaranteed results and continuous protection

90-99% Reduction Rate

Based on 3,000+ successful installations

Faqs

Radon System Repair Questions

Get answers to common questions about radon mitigation systems, costs, and installation.

How do I know if my radon mitigation system is working? 

The easiest check is observing the U-tube manometer located on your vent pipe. The colored fluid should be higher on one side, indicating that vacuum pressure is present. If the fluid levels are even, the fan is not generating suction. However, only a radon test confirms actual gas reduction.

Can a radon mitigation system run without a fan?

While “passive” systems exist in some new construction, most retrofitted mitigation systems rely on an electric fan to create necessary suction. If your system was designed to be active, running it without a functioning fan renders it ineffective, allowing radon levels to rise back to dangerous concentrations immediately.

Can weather affect my radon system performance?

Yes, extreme weather can impact system efficiency. Heavy rains, high winds, or rapid barometric pressure changes can fluctuate soil gases. In winter, condensation inside the vent pipe can freeze, potentially blocking airflow. If your fan becomes unusually loud during a hard freeze, contact us for a system inspection.

Can I repair a radon Mitigation system myself?

DIY repairs are not recommended. Radon systems involve electrical components and precise sealing to maintain negative pressure under your home. Improper repairs can break the vacuum seal or create leaks, exposing you to concentrated gas. It is safer and more effective to hire a licensed professional for any repairs.

Do I need maintenance if my radon levels are still low? 

Regular maintenance is crucial to ensure continued reliability. Fans typically last five to ten years, and foundations can settle over time, cracking floor seals. Routine inspections allow us to catch potential failures early, ensuring your system doesn’t stop working unexpectedly and expose your family to high radon levels.

Do I need to retest radon levels after repairs?

Yes, retesting is mandatory to verify the repair was successful. Whether we replaced a fan or sealed cracks, we need to confirm that the system is effectively lowering radon levels below EPA limits again. A post-repair test provides the data needed to ensure your home is truly as safe as possible.

Still have questions about radon mitigation system repair and maintenance?

Schedule Free Consultation

Our Solution

How We Fix Your Radon Problem

We use proven, EPA-approved methods to address radon repairs effectively.

A technician installing a radon mitigation system on a home.

01

DIAGNOSIS & RE-TESTING

Is your existing system failing? We perform a comprehensive inspection to diagnose why radon levels are rising or why your system is underperforming.

  • Check for new slab cracks, pipe breaches, and seal failures
  • Check current radon levels with electronic monitors
  • Identify air leakage points and foundation shifts
  • Verify “PFE” (Pressure Field Extension) under the slab

02

SYSTEM REPAIRS & SEALING

Once the issues are identified, we restore the integrity of your mitigation system.

  • High-grade sealing of all floor cracks
  • Repairing or replacing leaky pipe joints and fittings
  • Ensuring electrical connections meet current safety codes
  • Updating old sump pump covers
A technician looking at a radon mitigation system in a home interior.
Technician providing a new radon mitigation fan

03

NEW FAN & VERIFICATION

If your ran motor has reached the end of its life, we install a high-efficiency, ultra-quiet radon fan specifically sized for your home’s current needs.

  • Installation of energy-efficient, long-life fans
  • Calibration of the system for optimal suction/noise balance
  • Final clearance testing for peace of mind
  • Re-testing to confirm everything is working

Helpful Resources

Learn About Radon

Educational articles and guides to help you understand radon risks, testing, and mitigation.

Testimonials

What Our Clients Say

Don’t just take our word for it – see what homeowners and real estate professionals have to say about our work.

Quote Icon

★★★★★

Scott and his team were amazing to deal with and did a great job. Extremely polite and worked to completely solve our problem. I couldn’t recommend them enough.

Ken Brechtel

Quote Icon

★★★★★

After some other guys wouldn’t give me the time of day for an issue I was having with a previously installed system, Scott took the time out of his busy schedule to stop by and offer a cost saving solution to my problem. Courteous and professional – which I can’t say the same about the other company I worked with. Thanks!

Joe DeFlippo

Quote Icon

★★★★★

Scott and his team were wonderful to work with – they are quick and responsive to questions and scheduling. They are professional and courteous, and know their stuff! I highly recommend them.

Kylie Dekdebrun

Service Area

Serving Western NY & Pennsylvania

We proudly serve homeowners and businesses throughout Western New York and Pennsylvania, including:

Buffalo, NY

Rochester, NY

Syracuse, NY

Erie, PA

Pittsburgh, PA

Jamestown, NY

…and surrounding communities. Not sure if we serve your area? Give us a call!

(716) 713-8098

Local Expertise

As a locally owned business, we understand the unique radon challenges in our region and provide tailored solutions.

Get In Touch

Request a Free Consultation

If you think your radon mitigation system is in need of an inspection or you believe your radon levels are cause for concern, fill out the form below.

Phone

(716) 713-8098

Service Area

10335 Manchester Rd, Boston, NY 14025

Hours of Operation

M-F 8am-5pm

A radon system should work consistently and quietly in the background of your home. If performance slips, repairs can help – and crawl space encapsulation may strengthen the overall approach.

"*" indicates required fields

Address
.gravity-form .gform_wrapper input:not([type=radio]):not([type=checkbox]):not([type=submit]):not([type=button]):not([type=image]):not([type=file]) { padding: 6px 11px; } body .gform_wrapper ul li.gfield { margin-top: 0px !important; } .gravity-form .gform_wrapper .top_label li.gfield.gf_left_half .ginput_container:not(.gfield_time_hour):not(.gfield_time_minute):not(.gfield_time_ampm):not(.ginput_container_date):not(.ginput_quantity):not(.datepicker):not(.gfield_signature_container), .gravity-form .gform_wrapper .top_label li.gfield.gf_right_half .ginput_container:not(.gfield_time_hour):not(.gfield_time_minute):not(.gfield_time_ampm):not(.ginput_container_date):not(.ginput_quantity):not(.datepicker):not(.gfield_signature_container) { margin: -4px 0 0 0 !important; }